Solar ionizer electrode work changes

Solar swimming pool ionizer electrode work changes

From left to right is the change of the sacrificial electrode during use:
1: Sacrificial electrode
Copper electrodes are sacrificial, are slowly decomposing. The use time of the electrode depends on various factors such as water quality, illumination, etc., and the use time is about 1-3 years. It is recommended to replace it when it reaches approximately 1 cm in diameter. The copper electrode forms residual deposits during slow consumption and requires periodic cleaning (one week is recommended).
2: Permanent electrode
The permanent spring-shaped electrode is made of stainless steel and is not consumed. Normally it does not need to be replaced, but mineral deposits of calcium will adhere to the spring-shaped electrode and require regular cleaning, especially in salt/calcium content comparisons high hard water area.
3: Effective test
Place the solar-ionized electrode in a glass bottle filled with water, and place it in the sunlight to let the electrode energize. After a while, it will find tiny bubbles on the electrode, start the ionization process, and the equipment works normally.
It also controls the growth of algae in ornamental ponds and can be used in the presence of plants and fish without causing any harm to them.

ONOSI Solar Pool Ionizer, TUV, CE Certification
ISO9001:2015 Certificated manufacturer, China factory price!
Application: Home; Pools: 80m³; Output Voltage: 6V; Gross weight: 1.6kg
ONOSI Solar

ONOSI Solar is China’s solar thermal utilization industry director unit, obtained “the low carbon economic contribution award” issued by the solar technology promotion center of United Nations industrial development organization.
ONOSI Solar fully implements the ISO900 international quality system authentication, has passed field inspections by TUV and other authoritative organizations. Won the certification of SOLAR KEYMARK, CE, ROHS, etc.
Tel: 0086-573-87718300
Mail: [email protected]
Feedback: Feedback with form